LMX-1204G-SFP-T
LMX-1204G-SFP-T
LMX-1204G-SFP-T
LMX-1204G-SFP-T
LMX-1204G-SFP-T
LMX-1204G-SFP-T
12-Port Industrial Gigabit Managed Ethernet Switch, w/8*10/100/1000Tx + 4*100/1000 SFP. EOT: -40° ~ 75°C
Product WarrantySee details >
0%
LMX-1204G-SFP-T
LMX-1204G-SFP-T
LMX-1204G-SFP-T
LMX-1204G-SFP-T
LMX-1204G-SFP-T
Introduction

Antaira’s LMX-1204G-SFP-T is a 12-port industrial gigabit managed Ethernet switch that is embedded with 8*10/100/1000Tx Fast Ethernet ports and four dual rate (100/1000X) SFP slots. This model is a fully manageable industrial Ethernet switch pre-loaded with standard Layer 2 network management software. It supports Jumbo Frame and wide bandwidth for data transmission and has sufficient port counts for any edge level connectivity solutions.

The LMX-1204G-SFP-T has a compact form factor design with an IP30 rating, DIN-rail mounting, and standard operating temperature support from -40°C to 75°C. It also provides high EFT and ESD protection for any industrial networking application within factory automation, ITS, power/utility, water wastewater, or any other outdoor or harsh environment.

Features
  • Supports 8*10/100/1000Tx Fast Ethernet Ports and 4*100/1000 SFP Slots
  • Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS (Recovery Time <50ms)
  • Configuration: Web Console, Telnet, CLI Command
  • Supports IGMP v1/v2/v3, up to 1024 Groups
  • Supports QoS (IEEE802.1p) and CoS/ToS
  • Supports IEEE802.1Q VLAN, SNMP v1/v2c/v3
  • System Warning Setting for Automatic Warning through E-Mail
  • Redundant Power Input Design – 12~48VDC
  • Housing: Metal IP 30 Rated; DIN-Rail and Wall Mount Support
  • Extended Operating Temperature: -40~75C
  • 5-Year Warranty
Package Content
  • 1 - LMX-1204G-SFP-T
  • 1 - RJ45 to DB9 Serial Console Cables
  • 2 - Wall Mounting Brackets and Screws
  • 1 - DC Cable - 18 AWG & DC Jack 5.5 x 2.1mm
Optional Accessories
  • DIN-RACK-2U
    Din-Rail to 19" Rack Mount Adapter for all Din-Rail Mountable Products, 2U Height
  • DRP-240-48
    240 Watt Industrial Single Output DIN Rail Power Supply - 48 VDC / 5.0 Amps
  • PA-60-48-US
    Power Adapter for LNP & IMP Series. Input 100-240VAC/1.4A, Output 48VDC/1.25A (US Plug)
  • SFP-M
    1 Gigabit Fiber SFP Transceiver, Multi Mode 550M / LC / 850nm, 0º~70ºC
  • SFP-S10
    1 Gigabit Fiber SFP Transceiver, Single-Mode 10km / LC / 1310nm, 0º~70ºC
Related Resources
Bus Depot
Bus Depot
Intelligent Transportation
Bus Depot
Light Rail
Light Rail
Intelligent Transportation
Light Rail
Technology
IEEE Standards
  • IEEE 802.3 10Base-T Ethernet
  • IEEE 802.3u 100Base-TX Fast Ethernet
  • IEEE 802.3ab 1000Base-T Gigabit Ethernet
  • IEEE 802.3z 1000Base-X Gigabit Fiber
  • IEEE 802.3x Flow Control
  • IEEE 802.1d STP (Spanning Tree Protocol)
  • IEEE 802.1w RSTP (Rapid Spanning Tree Protocol)
  • IEEE 802.1s MSTP (Multiple Spanning Tree Protocol)
  • ITU-TG.8032 / Y.1344 ERPS (Ethernet Ring Protection Switch)
  • IEEE 802.1Q Virtual LANs (VLAN)
  • IEEE 802.1x Network Authentication
  • IEEE 802.1p QoS/CoS Protocol for Traffic Prioritization
Processing Type
Store and Forward
Protocol
IGMP v1/v2/v3, SNMP v1/v2c/v3, TFTP, SNTP, SMTP, RMON, HTTP, HTTPS, Telnet, Syslog, DHCP Option 66/67/82, SSH/SSL, Modbus/TCP, LLDP, IPv4/IPv6
Flow Control
IEEE 802.3x flow control, back pressure flow control
Software
Configuration
  • Web Console,
  • Telnet,
  • CLI
VLAN Group
1~4094 groups
IGMP Group
1024 groups
Ethernet Redundancy
STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2(<50ms)
Performance
MAC Table Size
8K
Jumbo Frame
9.6 Kbytes
Memory Buffer
4 Mbits
Transfer Rate
  • 14,880pps for Ethernet Port
  • 148,800pps for Fast Ethernet Port
  • 1,488,000pps for Gigabit Ethernet Port
Switching Architecture
Back-Plane (Switching Fabric): 24Gbps
Ethernet Interface
Ethernet Port Count
8 ports
10/100/1000 BASE-T(X)
8 ports
Fiber Interface
Fiber Port Count
4 ports
100/1000 BASE-(F)X SFP
4 ports
Wavelength
Refers to SFP module
Mechanical Characteristics
Housing
Metal, IP30 protection
Mounting
DIN-Rail mount, Wall mount (Optional)
Dimensions (W × H × D)
54 × 142 × 99 mm
Weight
  • Unit weight : 2.2 lbs
  • Shipping weight : 3.0 lbs
Power Requirements
Power Connection
Removable 6-contact terminal block
Input Voltage
12V–48V DC, Redundant Input
Power Redundancy
Yes
System Power Consumption
15 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Environmental Limits
Operating Temperature
-40° to 75° C (-40° to 167° F)
Storage Temperature
-40° to 85° C (-40° to 185° F)
Ambient Relative Humidity
5% to 95% non-condensing
Regulatory Approvals
Certifications
FCC, CE
UL 60950-1
UL 61010-1 / UL 61010-2-201
ISA 12.12.01 (UL C1D2)
ATEX
NEMA TS2
EMI
  • FCC Part 15 Subpart B Class A
  • CE EN 55032 Class A
  • EN 61000-6-4 Class A
EMS
  • CE EN 55024
  • EN 61000-6-2
  • IEC61000-4-2 (ESD)
  • IEC61000-4-3 (RS)
  • IEC61000-4-4 (EFT)
  • IEC61000-4-5 (Surge)
  • IEC61000-4-6 (CS)
  • IEC61000-4-8 (Magnetic Field)
Stability Testing
  • Free Fall: IEC60068-2-32
  • Shock: IEC60068-2-27
  • Vibration: IEC60068-2-6
Green
RoHS Compliant
Warranty
5 years
Download
Models
  • LMX-1204G-SFP
    12-Port Industrial Gigabit Managed Ethernet Switch, w/8*10/100/1000Tx + 4*100/1000 SFP